Comments on: General home theater projector questions and … anyone using a projector for a 60″ or less screen size? http://www.consumerelectronicstips.com/uncategorized/general-home-theater-projector-questions-and-anyone-using-a-projector-for-a-60-or-less-screen-size/ Information you need to make smart decisions Wed, 06 Oct 2010 19:55:41 +0000 hourly 1 http://wordpress.org/?v=3.0.1 By: Antiphon http://www.consumerelectronicstips.com/uncategorized/general-home-theater-projector-questions-and-anyone-using-a-projector-for-a-60-or-less-screen-size/#comment-2549 Antiphon Mon, 31 Aug 2009 09:36:20 +0000 http://www.consumerelectronicstips.com/home-theater/general-home-theater-projector-questions-and-anyone-using-a-projector-for-a-60-or-less-screen-size/#comment-2549 As a result of the limitations imposed by your room you will be dealing with a maximum projector “throw” of approximately 80 to 84 inches, respectively, from the projection screen to the lens on the projector when using any of the top Epson home theater projectors, i.e., the Pro Cinema 1080 and Pro Cinema 1080 UB projectors as well as the new, shorter depth Pro Cinema 7500UB, Home Cinema 6500UB, Pro Cinema 7100 and Home Cinema 6100 projectors. The image quality should be fine when pairing any of these Epson projectors (in low lamp mode) with a good quality lower-gain 60-inch diagonal projection screen. (By the way your chosen screen size of 60 inches is very close to the ideal diagonal size for a viewing distance of 8 feet when using a projector or display that has a 1080p native resolution.) For your short-throw projection application you will not be in need of greater projector light output when using your desired screen size with any of the Epson projectors listed above; even if a small amount of ambient light is present. You can get a good idea of what to expect by using Projection Calculator Pro on the ProjectorCentral Website. (Please see the resources listed below for a link directly to the projection calculator.) Once you’ve installed your screen and Epson projector you will want to set the Brightness Control to Low and adjust the Brightness and Contrast settings for optimal performance in your viewing environment. Ideally you should use a PLUGE test pattern or other equivalent precision test pattern to properly set the Brightness and Contrast settings on the projector. By the way there are added benefits to using the lower lamp mode, and that is…, it will extend the life of the projector lamp and reduce the fan noise from the projector. Also, as a basic rule of thumb you should always attempt to keep the lens shift to an absolute minimum in order to minimize any potential image distortion. For such a small screen you will be able to use a screen with a specified gain of 1.0 or less, which will help when it comes to screen uniformity and obtaining a wider viewing angle than is the case with higher-gain screens. Opaque front projection screens are not specular and will not produce distracting reflections or glare as long as you choose a fixed frame or screen surround with a black velour finish. Please utilize the resources listed within each of the relevant Yahoo! Answers listed below for help in selecting the projection screen that works best for you. The remote controls included with many of today’s audio/video components, as well as aftermarket universal remote controls, such as Logitech’s extremely popular Harmony series, have the ability—with a little time invested in programming—to control a host of audio/video components from a single remote. Motion blurring and other motion-related artifacts will vary from manufacturer to manufacturer and model to model depending on several factors, including your sensitivity to such artifacts. You will need to shop carefully. Start by reading reviews from several reputable, well-respected sources and, when possible, thoroughly audition the display or projector firsthand before purchasing. When it comes to audio equipment your choices are (from least expensive to more expensive): a home-theater-in-a-box system, aka HTIB, which often includes loudspeakers, or your choice of loudspeakers combined with either a multichannel audio/video receiver (AVR) or a pre-amplifier/processor accompanied by one or more separate power amplifiers. I strongly recommend that you make every effort to avoid the HTIB solution if possible. When shopping for loudspeakers it is essential that you carefully and thoroughly audition a wide range of loudspeakers beforehand to find what best suits your needs and preferences. Also, for what it’s worth there are several reputable online direct marketing loudspeaker manufacturers from which to choose that offer high quality, high performance loudspeakers at very reasonable prices along with generous satisfaction guaranties; just be very careful to avoid the notorious “white van” brands*. One last note..., unless you’ve found exceptional discounts on the two older Epson projectors you’ve mentioned I recommend that you consider purchasing one of the four models listed below, with priority given to the UB (Ultra Black) models. ######################## RESOURCES ######################## Planning and Setting Up a Front-Projection Home Theater http://www.isftv.com/Article_Planning_and_Setting_Up.html Projection Calculator Pro - Throw Distance and Screen Size http://www.projectorcentral.com/projection-calculator-pro.cfm Epson PowerLite Pro Cinema 7500UB Projector Product Code: V11H293320 http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&oid=63077381 Epson PowerLite Home Cinema 6500UB Projector Product Code: V11H292020 http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&oid=63080840 Epson PowerLite Pro Cinema 7100 Projector Product Code: V11H291420 http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&oid=63077380 Epson PowerLite Home Cinema 6100 Projector Product Code: V11H291120 http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&oid=63077379 Plasma behind motorized projector screen? http://answers.yahoo.com/question/index?qid=20090203213349AANJTFK What is the best full HD projector out right now for under $3000? http://answers.yahoo.com/question/index?qid=20090114235756AABgpHP What is the cheapest 1080p projector available? http://answers.yahoo.com/question/index?qid=20081029122517AAM80Ey How to determine BEST screen size for home theatre projector viewing? http://answers.yahoo.com/question/index?qid=20071121170743AAnVZ3T How do I choose a home theater screen? http://answers.yahoo.com/question/index?qid=20081214185050AAQcp0v I need High-End home theatre processor which one is best? http://answers.yahoo.com/question/index?qid=20081003101115AAgc1mv ________________________ *Genesis Media Labs 6.1? http://answers.yahoo.com/question/index?qid=20080620222335AAh3U9L (Includes information and resources on “white van” scams.)   As a result of the limitations imposed by your room you will be dealing with a maximum projector “throw” of approximately 80 to 84 inches, respectively, from the projection screen to the lens on the projector when using any of the top Epson home theater projectors, i.e., the Pro Cinema 1080 and Pro Cinema 1080 UB projectors as well as the new, shorter depth Pro Cinema 7500UB, Home Cinema 6500UB, Pro Cinema 7100 and Home Cinema 6100 projectors. The image quality should be fine when pairing any of these Epson projectors (in low lamp mode) with a good quality lower-gain 60-inch diagonal projection screen. (By the way your chosen screen size of 60 inches is very close to the ideal diagonal size for a viewing distance of 8 feet when using a projector or display that has a 1080p native resolution.)

For your short-throw projection application you will not be in need of greater projector light output when using your desired screen size with any of the Epson projectors listed above; even if a small amount of ambient light is present. You can get a good idea of what to expect by using Projection Calculator Pro on the ProjectorCentral Website. (Please see the resources listed below for a link directly to the projection calculator.)

Once you’ve installed your screen and Epson projector you will want to set the Brightness Control to Low and adjust the Brightness and Contrast settings for optimal performance in your viewing environment. Ideally you should use a PLUGE test pattern or other equivalent precision test pattern to properly set the Brightness and Contrast settings on the projector. By the way there are added benefits to using the lower lamp mode, and that is…, it will extend the life of the projector lamp and reduce the fan noise from the projector. Also, as a basic rule of thumb you should always attempt to keep the lens shift to an absolute minimum in order to minimize any potential image distortion.

For such a small screen you will be able to use a screen with a specified gain of 1.0 or less, which will help when it comes to screen uniformity and obtaining a wider viewing angle than is the case with higher-gain screens. Opaque front projection screens are not specular and will not produce distracting reflections or glare as long as you choose a fixed frame or screen surround with a black velour finish. Please utilize the resources listed within each of the relevant Yahoo! Answers listed below for help in selecting the projection screen that works best for you.

The remote controls included with many of today’s audio/video components, as well as aftermarket universal remote controls, such as Logitech’s extremely popular Harmony series, have the ability—with a little time invested in programming—to control a host of audio/video components from a single remote.

Motion blurring and other motion-related artifacts will vary from manufacturer to manufacturer and model to model depending on several factors, including your sensitivity to such artifacts. You will need to shop carefully. Start by reading reviews from several reputable, well-respected sources and, when possible, thoroughly audition the display or projector firsthand before purchasing.

When it comes to audio equipment your choices are (from least expensive to more expensive): a home-theater-in-a-box system, aka HTIB, which often includes loudspeakers, or your choice of loudspeakers combined with either a multichannel audio/video receiver (AVR) or a pre-amplifier/processor accompanied by one or more separate power amplifiers. I strongly recommend that you make every effort to avoid the HTIB solution if possible.

When shopping for loudspeakers it is essential that you carefully and thoroughly audition a wide range of loudspeakers beforehand to find what best suits your needs and preferences. Also, for what it’s worth there are several reputable online direct marketing loudspeaker manufacturers from which to choose that offer high quality, high performance loudspeakers at very reasonable prices along with generous satisfaction guaranties; just be very careful to avoid the notorious “white van” brands*.

One last note…, unless you’ve found exceptional discounts on the two older Epson projectors you’ve mentioned I recommend that you consider purchasing one of the four models listed below, with priority given to the UB (Ultra Black) models.

######################## RESOURCES ########################

Planning and Setting Up a Front-Projection Home Theater
http://www.isftv.com/Article_Planning_and_Setting_Up.html

Projection Calculator Pro – Throw Distance and Screen Size
http://www.projectorcentral.com/projection-calculator-pro.cfm

Epson PowerLite Pro Cinema 7500UB Projector
Product Code: V11H293320
http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&oid=63077381

Epson PowerLite Home Cinema 6500UB Projector
Product Code: V11H292020
http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&oid=63080840

Epson PowerLite Pro Cinema 7100 Projector
Product Code: V11H291420
http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&oid=63077380

Epson PowerLite Home Cinema 6100 Projector
Product Code: V11H291120
http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&oid=63077379

Plasma behind motorized projector screen?
http://answers.yahoo.com/question/index?qid=20090203213349AANJTFK
What is the best full HD projector out right now for under $3000?
http://answers.yahoo.com/question/index?qid=20090114235756AABgpHP
What is the cheapest 1080p projector available?
http://answers.yahoo.com/question/index?qid=20081029122517AAM80Ey

How to determine BEST screen size for home theatre projector viewing?
http://answers.yahoo.com/question/index?qid=20071121170743AAnVZ3T
How do I choose a home theater screen?
http://answers.yahoo.com/question/index?qid=20081214185050AAQcp0v

I need High-End home theatre processor which one is best?
http://answers.yahoo.com/question/index?qid=20081003101115AAgc1mv
________________________

*Genesis Media Labs 6.1?
http://answers.yahoo.com/question/index?qid=20080620222335AAh3U9L
(Includes information and resources on “white van” scams.)
 

]]> By: Daniel K http://www.consumerelectronicstips.com/uncategorized/general-home-theater-projector-questions-and-anyone-using-a-projector-for-a-60-or-less-screen-size/#comment-2550 Daniel K Mon, 31 Aug 2009 09:36:20 +0000 http://www.consumerelectronicstips.com/home-theater/general-home-theater-projector-questions-and-anyone-using-a-projector-for-a-60-or-less-screen-size/#comment-2550 It sounds like you have a pretty good understanding already of the issues involved in setting up a home theater projector. I think you a worrying a bit too much though. The projection distance will be determined by the projector lens itself. The projector cannot just go at any distance from the screen. The "zoom" will give you a foot or two of "play" on the distance. If you download the manual for your projector it will have a simple calculator for screen size and distance. You will notice pixels if you are close to the screen. Otherwise the picture will be great. Avoid light on the screen itself. There will be no reflection if you use a standard projection screen. Audio is the part that will involve a bit more investment - any good home theater receiver and speakers should work fine. It sounds like you have a pretty good understanding already of the issues involved in setting up a home theater projector. I think you a worrying a bit too much though.

The projection distance will be determined by the projector lens itself. The projector cannot just go at any distance from the screen. The "zoom" will give you a foot or two of "play" on the distance. If you download the manual for your projector it will have a simple calculator for screen size and distance.

You will notice pixels if you are close to the screen. Otherwise the picture will be great. Avoid light on the screen itself.

There will be no reflection if you use a standard projection screen.

Audio is the part that will involve a bit more investment – any good home theater receiver and speakers should work fine.

]]>